Non-vibration drill - メーカー・企業と製品の一覧

Vibration-free water circulation drill for exterior wall tile peeling prevention work

Lightweight and compact design water circulation vibration-free drill, customizable grip to suit your preferences.

Low noise and dust-free, allowing construction to be carried out in places like office buildings and hospitals without disruption. Since it is a circulation type, there is no need for scaffolding to lift water or dispose of sludge. Normally, drilling work with a non-vibrating drill produces about 50 liters of sludge in a day, but with the Holeman AT-5, this can be reduced to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 ■ High-performance exhaust blower enables continuous operation in summer ■ Equipped with an error mode that can handle voltage drops and overloads ■ Shorter length for a more compact, lightweight design that is less likely to tip over on scaffolding ■ Compact storage in a dedicated case ■ High-power motor with improved quietness ■ Stepless speed control for adjusting rotation speed ■ Customizable with a safe and stable side handle or a compact straight grip focused on mobility ■ Uses resin containing metallic powder for a more luxurious feel! ■ No need to purchase parts like grip pipes based on drilling depth or diameter ■ Compatible with consumable parts from the Water Smasher AT series.

企業：エアテックジャパン篠崎事業所
価格：Other

Work tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Water circulation non-vibration drill "Mizusumashi G1"

A water circulation drill that achieves low noise and vibration-free operation with a diamond bit rotary drill! It generates no dust, collects concrete wastewater, filters it, and recirculates it!

The "Mizusumashi G1" is a water circulation type non-vibrating drill manufactured and sold by Kurei Manufacturing Co., Ltd. It achieves low noise and low vibration operations with a diamond bit rotary drill. Additionally, since it is wet-type, it does not generate dust and collects and circulates concrete wastewater after filtration, keeping the worksite clean. Furthermore, by replacing parts, it can accommodate a wide range of drilling diameters from small diameters (φ4.0 to φ10.5) to anchor sizes (φ12.7 to φ18.0). 【Features】 ■ Low vibration: Since it does not use impact, it is less likely to chip tiles or structures. ■ Low noise: Indoor noise level during drilling is 60dB to 68dB. ■ Dust-free: Being wet-type, it does not generate dust. ■ Non-contaminating: It collects and circulates concrete wastewater after filtration, keeping the worksite clean. ■ NETIS registered product: No. CG-220010-A *For more details, please request materials or view the PDF data from the download.

企業：呉英製作所広島本社
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Water circulation non-vibration drill "Mizusumashi AT-IV type"

Ideal for construction while remaining in place with no vibration, low noise, and dust-free perforation! Anchor work on asbestos-containing coating surfaces and pinpoint peeling available for rent!

We would like to introduce our water circulation type vibration-free drill, the "Mizusumashi AT-IV model." Due to its vibration-free, low-noise, and dust-free drilling capabilities, it is suitable for construction while occupied. When drilling through exterior walls, the noise level indoors is between 60dB and 68dB. By changing the tip components and tools, you can select the drilling diameter and depth. Additionally, we offer a set for removing asbestos coatings. Please contact us for more details. 【Features】 ■ Drill for AT-IV model - Two-stage switching according to the bit - Easy drilling at optimal rotation speed ■ Circulation device for AT-IV model - Electrical components are centralized at the top, making water replacement easy - 20% increase in suction power, 50% weight reduction (compared to conventional models) *For more details, please refer to the PDF materials or feel free to contact us.

企業：サンワ・リノテック
価格：Other

Drilling Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Water circulation non-vibration drill "Hole Man AT-5" <Rental available>

Suitable for construction while maintaining low noise and dust-free conditions. Equipped with a high-performance exhaust blower for stable operation even in summer. Preventive work for tile peeling [Exhibition Participation].

The "Hole Man AT-5" is a water-circulating, vibration-free drill used for drilling into exterior wall tiles and concrete. Because it uses a circulation system, there is no need for scaffolding to draw water or dispose of sludge. Typically, drilling with a vibration-free drill produces about 50 liters of sludge in a day, but with the Hole Man AT-5, this can be reduced to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 ■ Shorter length, more compact and lightweight design that is less likely to topple over on scaffolding ■ High-power motor with improved quietness ■ Customizable for safety and stability with a side handle or for mobility with a compact straight grip ■ Many other advantages! * For product details, please refer to the materials. Feel free to contact us for inquiries.

企業：エアテックジャパン篠崎事業所
価格：Other

Work tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Blaze Bit 19φ for removing elastic coatings containing asbestos.

Asbestos finishing materials can be removed using a wet method, and a dry vibration drill can be used. The removal diameter is 19mm, so it can also accommodate temporary 4-inch anchor wall connection holes.

Remove the asbestos layer of about 2 to 5 mm using a 19 mm blaze bit, and drilling can be done with a dry vibration drill. This method is easy to implement even for workers accustomed to vibration drills, especially when asbestos is only present on the surface. The work consists of "two processes" of removal and drilling, but since the asbestos-containing waste is only from the wall surface, the amount of asbestos waste can be reduced compared to direct drilling. The waste will be solidified concrete, classified as asbestos-containing industrial waste. For details, please refer to the related link "Research Report on the Removal of Asbestos-Containing Construction Finishing Materials Using Water-Circulation Non-Vibrating Drills - Revised Edition." This is a lightweight and compact design water-circulation non-vibrating drill. It is low-noise and dust-free, allowing construction to be carried out even in office buildings and hospitals while occupied. Since it is a circulation system, there is no need for scaffolding for water collection or sludge disposal. Sludge waste can be reduced to about 1/50, and since the coolant is tap water, running costs can also be kept low. Consumable parts from the Water Smashing AT series can also be used.